official web site:www.jianhua-pce.com
0086-533 7111578


Home > Knowledge > Content


Source: | Updated: May 10, 2016

Rebound hammer test (Schmidt Hammer) is used  to  provide  a  convenient  and rapid indication of the compressive strength of concrete. It consists of a spring controlled mass that slides on a plunger within a tubular housing.

The operation of rebound hammer is shown in the fig.1. When the plunger of rebound hammer is pressed against the surface of concrete, a spring controlled mass with a constant energy is made to hit concrete surface to rebound back. The extent of rebound, which is a measure of surface hardness, is measured on a graduated scale. This measured value is designated as Rebound Number (rebound index). A concrete with low strength and low stiffness will absorb more energy to yield in a lower rebound value.

The rebound hammer test method is used for the following purposes:
(a)  To find out the likely  compressive  strength  of  concrete  with  the  help  of suitable co-relations between rebound index and compressive strength.

(b)  To assess the uniformity of concrete.

(c)  To assess the quality of concrete in relation to standard requirements.

(d)  To assess the quality of one element of concrete in relation to another.

Rebound hammer test method can be used to differentiate the acceptable and questionable parts of the structure or to compare two different structure based on strength.

Principle of Rebound Hammer Test:

Rebound hammer test method is based on the principle that the rebound of an elastic mass depends on the hardness of the concrete surface against which the mass strikes. The operation of the rebound hammer is shown in figure above. When the plunger of rebound hammer is pressed against the concrete surface, the spring controlled mass in the hammer rebounds. The amount of rebound of the mass depends on the hardness of concrete surface. Thus, the hardness of concrete and rebound hammer reading can be correlated with compressive strength of concrete. The rebound  value  is  read  off  along  a  graduated  scale  and is designated  as  the rebound  number  or  rebound  index.  The  compressive  strength  can  be  read directly from the graph provided on the body of the hammer.

Contact Us
Address: Wangzhu Industrial Zone, Linzi District, Zibo City, Shandong, China
Tel: 0086-533 7111578
Fax: 0086-533 7114227
Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML